Mosin nagant


I went ahead and bought one. I've even refinished the stock. It really looked shabby when I bought it. Old finish was flaking off and that red varnish was even peeling. Now it looks great. I used the RIT Dye and Linseed Oil method and it looks way better than I ever thought it would. I would post a pic, but my USB drive on my computer just took a dump. I cannot wait until I can shoot it. The only thing left for me to do is a trigger job, but I want to shoot it the way it is first.
 

Took my T53 to the range this weekend... hehe, I love shooting Mosins! Even though this thing is 60 years old it still shoots true and blows the leaves away on the ground in front of me (doesn't mean anything, just cool). I think I need to get a hog with this thing.... oh yes.
 
Took my T53 to the range this weekend... hehe, I love shooting Mosins! Even though this thing is 60 years old it still shoots true and blows the leaves away on the ground in front of me (doesn't mean anything, just cool). I think I need to get a hog with this thing.... oh yes.


This post reminds me of why my gf says Boys are Five!

Funny, the things that turns us into 5 yr olds again. Looking forward to shooting mine as well. Wish I had 25-50 acres to play on at my leisure.
 
All MN owners must have a copy of this:

Comparison of AK, AR-15, and Mosin-Nagant

AK: It works though you have never cleaned it -- ever.
AR: You have $9 per ounce special non-detergent synthetic Teflon infused oil for cleaning.
MN: It was last cleaned in Berlin in 1945. Maybe.

AK: You are able to hit the broad side of a barn from inside.
AR: You are able to hit the broad side of a barn from 600 meters.
MN: You can hit the farm from two counties over.

AK: Cheap magazines are fun to buy.
AR: Cheap magazines melt.
MN: What's a magazine?

AK: Your safety can be heard from 300 meters away.
AR: You can silently flip off the safety with your finger on the trigger.
MN: What's a safety?

AK: Your rifle comes with a cheap nylon sling.
AR: Your rifle has a 9 point stealth tactical suspension system.
MN: Your rifle has four dog collars tied end-to-end.

AK: Your bayonet makes a good wire cutter.
AR: Your bayonet is actually a pretty good steak knife.
MN: Your bayonet is longer than your leg.

AK: You can put a .30" hole through 12" of oak, if you can ever hit it.
AR: You can put one hole in a paper target at 100 meters with 30 rounds.
MN: You can knock down everyone else's target with the shock wave of your bullet going downrange.

AK: When out of ammo your rifle will nominally pass as a club.
AR: When out of ammo, your rifle makes a great wiffle bat.
MN: When out of ammo, your rifle makes a supreme war club, pike, boat oar, tent pole, or firewood.

AK: Recoil is manageable, even fun.
AR: What's recoil?
MN: Recoil is often used to relocate shoulders thrown out by the previous shot.

AK: Your sight adjustment goes to "10", and you've never bothered moving it.
AR: Your sight adjustment is incremented in fractions of minute of angle.
MN: Your sight adjustment goes to 12 miles and you've actually tried it.

AK: Your rifle can be used by any two bit nation's most illiterate conscripts to fight elite forces worldwide.
AR: Your rifle is used by elite forces worldwide to fight two bit nations' most illiterate conscripts.
MN: Your rifle has fought against itself and won every time.

AK: Your rifle won some revolutions.
AR: Your rifle won the Cold War.
MN: Your rifle won a pole vault event.

AK: You paid $350.
AR: You paid $900.
MN: You paid $59.95.

AK: You buy cheap ammo by the case.
AR: You lovingly reload precision crafted rounds one by one.
MN: You dig your ammo out of a farmer's field in Ukraine and it works just fine.

AK: You can intimidate your foe when you fix bayonet.
AR: Your can give your foe a good laugh when you fix your bayonet.
MN: You can bayonet your foe on the other side of the river without leaving the comfort of your hole.

AK: Service life, 50 years.
AR: Service life, 40 years.
MN: Service life, 100 years, and counting.

AK: It's easier to buy a new rifle when you want to change cartridge sizes.
AR: You can change cartridge sizes with the push of a couple of pins and a new upper.
MN: You believe no real man would dare risk the ridicule of his friends by suggesting there is anything but 7.62x54R.

AK: You can repair your rifle with a big hammer and a swift kick.
AR: You can repair your rifle by taking it to a certified gunsmith and it's under warranty!
MN: If your rifle breaks, you can buy a new one.

AK: You consider it a badge of honor when you get your handguards to burst into flames.
AR: You consider it a badge of honor when you shoot a sub-MOA 5 shot group.
MN: You consider it a badge of honor when you cycle 5 rounds without the aid of a 2x4.

AK: After a long day the range you relax by watching "Red Dawn".
AR: After a long day at the range you relax by watching "Blackhawk Down".
MN: After a long day at the range you relax by visiting the chiropractor.

AK: You can accessorize you rifle with a new muzzle brake or a nice stock set.
AR: Your rifle's accessories are eight times more valuable than your rifle.
MN: Your rifle's accessory is a small tin can with a funny lid, but it's buried under an apartment building somewhere in Budapest.

AK: Your rifle's finish is varnish and paint.
AR: Your rifle's finish is Teflon and high tech polymers.
MN: Your rifle's finish is low grade shellac, cosmoline and Olga's toe nails.

AK: Your wife tolerates your autographed framed picture of Mikhail Kalashnikov.
AR: Your wife tolerates your autographed framed picture of Eugene Stoner.
MN: You're not sure there WERE cameras to photograph Sergei Mosin.

AK: Late at night you sometimes have to fight the urge to hold your rifle over your head and shout "Wolverines!"
AR: Late at night you sometimes have to fight the urge to clear your house, slicing the pie from room to room.
MN: Late at night, you sometimes have to fight the urge to dig a fighting trench in the yard to sleep in.
 
Local store now has T53s. Headed down to look and more than likely, buy one. :biggrin:
 
Got my first Mosin last year, and the cosmoline came right off the metal parts with the boiling water method. I sprayed WD-40 on the wood and rubbed it in with my hands, and wiped the cosmoline off of it that way. Must have worked because the cases never stuck in the chamber after firing. I love the history of that gun, and I got an 1895 Nagant gas-seal revolver to go with it. They make a nice set, but the prices of both are rising. Grab one quickly while you still can.
 
unazyvad.jpg
 
Had a rack of Mosins @ Cabela's for $149.95. Looked like they had been used as bats in the world series for 30 years. They could have at least removed the rust.

Hacked me off and I went to another LGS and got an SA XDm 9mm 4.5 in. instead. Popped a Viridian X5L on it (my eyes are failing) and never looked back, because I wouldn't have seen anything even if I did. Shameful plug below:

Link Removed
 
Bought mine at Gander as I said before and it had some Cosmo but not a lot. But you still have to get it out of everything. Least that's the general consensus. So I used boiling water and Purple Power. At first I thought what a pain in the ass this thing having to deal with all the cleaning but I'm glad I did as I've really gotten into it and learned and done some things I haven't done before. The stock was beat up in places and after watching refinishing stocks on YouTube using boiling water, Crud Kutter, cheese cloth and all that crap I went and bought some Citristrip and let me tell you....amazing stuff. EZPZ.

Antique walnut satin stain goes on tomorrow after final touches with 0000 and sandpaper.
 
mine was not in bad shape.... and after a little cleaning (the stock) I am going to leave it just the way it is.... has the look of being used in battle, but not beaten as others have said theirs were....just the amount of use you would expect from a gun made in the 40's....I like the look.... and for integrity... am keeping it that way.... may buy another and put it into an archangel stock....
 
Assault weapon! Assault weapon! Run! Scream! Hide! Lock up the kids! Release the hounds!!!!!

Looks kinda cool though.
 
mine was not in bad shape.... and after a little cleaning (the stock) I am going to leave it just the way it is.... has the look of being used in battle, but not beaten as others have said theirs were....just the amount of use you would expect from a gun made in the 40's....I like the look.... and for integrity... am keeping it that way.... may buy another and put it into an archangel stock....

exactly what i want to do...but i want to get a nice hex to safe queen and take the one i have now and throw on the archangel stock and one of the scope mounts that sits on the receiver.
 
exactly what i want to do...but i want to get a nice hex to safe queen and take the one i have now and throw on the archangel stock and one of the scope mounts that sits on the receiver.

yeah...that is what I want to do too... keep one stock, and take one with cruddy stock for cheap with good barrel and put an archangel stock on it....
 
Finally refinished mine. Took awhile as it was my first job and lemme tell ya, the Minwax Polyshades takes a velvet touch and fine bristled brush. It ain't perfect but I think it looks way better than it did when bought. Finally scored some ammo for it so soon as that hot little box arrives I'm goin' shootin.

I don't know if I'd call refinishing that thing "fun" but damned if I don't wanna do it again so might have to get another one. :tongue:
 
Anyone know where I can find a type 53 for a reasonable price. I am new to this forum and I appreciate your help. Thanks.
 
Anyone know where I can find a type 53 for a reasonable price. I am new to this forum and I appreciate your help. Thanks.

I got lucky a couple of years ago and scored one at a gun show in NM, traded a handgun for it. I recommend surfing gunbroker or armslist to get an idea of a reasonable price and perhaps find an FFL holder selling one near you.
 
Thanks for your help. I have been looking around locally and on some of the national sites and am just looking for ideas. Any idea of what price range is reasonable? And are there appreciable reasons/advantages to getting a 44 over a 53. Again, thanks for your input. I had one years ago as a kid that I got from a collector. I took the top part of the stock off and the barrel was so deeply pitted that I was afraid to ever shoot it, it was pretty rough all over. I paid $35 for it over 30 years ago. Traded it for a Precision Bass so I came out of it pretty good. Any help is welcome.
 

Members online

Forum statistics

Threads
49,544
Messages
611,260
Members
74,959
Latest member
defcon
Back
Top