@Cathyinblue. The "black leather" is a plastic called Kydex. You stick it in the oven at 400 degrees for a bit. Let it melt, you'll see it start to sag, this is good. Using good gloves, take it and lay it over your gun and press it down. I used a small heat gun to get the tighter areas and for adjusting the grip to the gun. I made a vacuum box to help form it but your best tool is your fingers and a heat gun. Dont be scared if it doesn't look right the first time. If you dont like it then put the Kydex back in the oven on an old cookie sheet and it will flatten out again and you can start over.
Here is a new pic. I work for a jewelry engraving company and I run two lasers there. I burnt my name into it. Looks like an iron brand.
Link Removed