Ruger 10/22

4

4Opencarry

New member
I am in the market for a Ruger 10/22. I have been considering the Takedown. A friend told me not to get the Takedown because the rifle will become less reliable and less accurate due the the barrel being remove and replaced all the time. Does anyone know this to be true? It seems to me that Ruger is one of the best rifle manufacturers out there and would not build a rifle that would have this problem.
 
If you don't need to take the gun down regularly then stick to the standard 10/22. It's a pretty darn accurate plinker.
 
I have a takedown and shoot several times per year, hundreds of rounds each time. The accuracy has changed at all.
 
Do with the regular. It has lots of stock options out there. The takedown doesn't fit aftermarket stocks.

Check out hightowerarmory.com and tell them Brandon sent you.
They make stock kits and really nice melon ire barrels for ruger 10/22.
 
BC1 said:
If you don't need to take the gun down regularly then stick to the standard 10/22. It's a pretty darn accurate plinker.
Click to expand...

Yeah, agree, but the Takedown is intended to be a "backpack" gun, and if someone has a need for something like that, then whether or not the standard model is perfectly reliable isn't the issue.

I would say that as long as you're careful when assembling and disassembling the weapon, the locking lug should last a very long time. Assuming Ruger has their heat-treating processes down (and I personally do assume that), high-tolerance mating surfaces of steels and certain alloys can last many years even under extremely heavy use.

If your friend has any documentation to offer about the locking lug being likely to wear out of tolerance under normal use, then certainly take that into consideration. But if he's just surmising or conjecturing, look for reviews by known entities like Guns & Ammo or well-known and reputable gear-reviewers on YouTube or something, and decide from there if it is likely to serve the purpose you're considering it for well. Best advice I have for you.

Blues
 
Howdy,

Buy one of each model.

I have an old carbine and a newer, 2010 model Sporter.

I like a gun with a long pull and to me the carbine always had too short of a pull and the Sporter is about 1" or so longer and is easier to shoot.

Paul
 
I tried the takedown and found the stock to be a bit bulky and awkward to hold. I ended up with the Stainless model instead. It straps well on the backpack or bike (moto or pedal) and feels much better when using.

4Opencarry said:
I am in the market for a Ruger 10/22. I have been considering the Takedown. A friend told me not to get the Takedown because the rifle will become less reliable and less accurate due the the barrel being remove and replaced all the time. Does anyone know this to be true? It seems to me that Ruger is one of the best rifle manufacturers out there and would not build a rifle that would have this problem.
Click to expand...
 
22 LR Takedowns: Browning, Ruger, Marlin Go Head to Head
~
This the link to an assessment of the Ruger 10/22 Takedown by GunTest, it may be of some help. I own a standard ranch with a folding stock that provides great mobility but have not owned or used a takedown. GunTest's assessments have been very useful to me in the past and their review of the takedown is very positive. However they do not address a long term use wear scenario to specifically answer you question. But does explain that there is an adjustment that can be made as the lock up system may wear, this would help with the problem you are asking about.
 
If money isn't a question, I like the M&P 15-22 MOE over the Ruger 10/22. It's not as customizable as the 10/22 but it's just as accurate and more fun for plinking and varmint. Also very close feel to an AR-15 for training, just lower recoil.
 
I do not have a 10/22 Takedown but have experience with Ruger guns including the regular 10/22 models. I have the utmost confidence in Ruger and that the takedown is a great quality rifle and would not be concerned about it losing accuracy. With that being said, unless you are needing to take it apart regularly I would recommend sticking with one of their other models. If accuracy is a concern you will be able to customize it (both for sake of accuracy and looks) with a bull barrel, trigger assembly, bedded stocks, and just about anything else you can imagine. They are great out of the box but if you choose, there is a lot you can do to make it even better. No matter what you choose, i'm sure you will have a great time shooting it.
 
Model Number: 11112 | Caliber: 22 LR
~
Stock: Black Synthetic
Capacity: 10
Material: Alloy Steel Finish:
Satin Black
Front Sight: Gold Bead
Rear Sight: Adjustable
Barrel Length: 16.62"
Overall Length: 36.75"
Weight: 4.67 lbs.
Length of Pull: 13.50"
Twist: 1:16" RH Grooves: 6
Barrel Feature: Threaded Barrel with Flash Suppressor
Suggested Retail: $419.00
~
Ruger® 10/22 Takedown® Autoloading Rifle Model 11112
~
Posters seemingly have their own likes and dislikes that shadow their ability to give advise about the weapon of choice of another. The OP's request for information about a particular function of a Ruger 10/22 Takedown and no matter what we like or dislike or think should be used and/or bought. It is not our choice it is 40opencarry's and it is not our place to dissuade him in any manner of making that selection other than though our providing him with appropriate, viable, verifiable information about the weapon of his choice.
~
Above link is for the Ruger 10/22 Takedown in SS @ Ruger.com. It surprises me that they do not list the length of the separate pieces as part of their specification sheet for prospective buyers to consider. The overall length is 37", so to my thinking the longest piece which appears from the picture to be the barrel half isn't going to be longer than about 20". To my thinking that is pretty short when you are thinking about a weapon to pack/store/hide for later use. With the simple assembly system the weapon possesses and that systems ability to adjust the assembly lockup, I find this to be an ideal purchase for what the OP is looking to purchase.
 
If you like the take down get it . I haven't found a ruger I haven't been very pleased with. That being said I would rather have a standard 10/22 and put a folding stock on it if I needed a packable 22. I think a folding stock will shorten your 10/22 enough to pack and be faster and easyer to get into action. Your choice, good luck.
 
dogshawred said:
~
Ruger® 10/22 Takedown® Autoloading Rifle Model 11112
~
Posters seemingly have their own likes and dislikes that shadow their ability to give advise about the weapon of choice of another. The OP's request for information about a particular function of a Ruger 10/22 Takedown and no matter what we like or dislike or think should be used and/or bought. It is not our choice it is 40opencarry's and it is not our place to dissuade him in any manner of making that selection other than though our providing him with appropriate, viable, verifiable information about the weapon of his choice.
~
Click to expand...

I was simply stating my opinion, giving him another option because the M&P has an adjustable stock and push pins to break down like an AR, that may fit what he needs, it may not. It was giving him an option, not dissuading. I don't care what he buys, I know it is his choice. I did not once put down the Ruger 10/22, I simply stated that the M&P to me was more fun to shoot. I also said the M&P was not as customizable as the 10/22. Again, NOT once did I put down the 10/22.

So, suggesting a gun that may fit his needs is apparently against the rules...
 
Thanks for all the suggestions. I am happy to report that I made a decision. I am the proud owner of the new Ruger 50th anniversary stainless 10/22. Although I am sure the Takedown is a fine rifle, I decided that I didn't need the ability to have a compact option.
 
In our family, we have both the takedown model and the carbine. Personally, I favor the takedown. Granted, you can't attach a lot of accessories. But, a small scope is good enough for me. Both our 10/22s have had thousands of rounds shot through them with no problems. i just find that the takedown is easy to transport in it's carrying case without worrying about damage. Whichever one you purchase, consider also getting the "Trimag". This allows you to connect 3 standard 10/22 magazines for quicker reloading.
 
I am looking for a

# 11125
MODEL: 10/22 "Take Down" (Davidsons Exclusive)
TYPE: Rifle
SIGHTS: Front: Red Fiber Optic Rr: Adj Green Fiber Optic
CAL: 22LR
BARREL*LGTH: 16.25" Threaded Barrel
FINISH: Polished Stainless Steel Barrel
ACTION: Semi-Automatic
WEIGHT: 4.75 lbs
STOCK: Black Synthetic
CAPACITY: 25+1
FEATURES:*Scope Base Adapter, Davidsons Exclusive
Rifling: 1-16" RH, Black Cordura Takedown Case
MSRP: $472.00
 
Steon said:
I'd think you'd want a Mace or a Battle Axe. And shouldn't you be up in Washington Hunting your Wesen? :sarcastic:
Click to expand...

Nah, I need something for packing in the woods, and the ability to attach a silencer is nice. I took Juliette to the gun store yesterday so she could try the Ruger LCR on for size. She likes it, but then asked "Can I see a Taurus Judge?"
 
You must log in or register to reply here.

New Threads

Members online

No members online now.
Total: 92 (members: 0, guests: 92)

Latest posts

Forum statistics

Threads
49,523
Messages
610,661
Members
74,992
Latest member
RedDotArmsTraining

Share this page

Back
Top